Floor porcelain install
Thin-set over level screed — joint width, spacers and floor drains agreed on plan.
Floor · wall · pool · waterproofing
Tile installation and waterproofing on Koh Samui — porcelain floors, wet rooms, pool coping and epoxy grout. Site visit before quote from CHK / Samui Fixit.
Filter by scope — flat vs mountain access and owner-supplied tile noted before dispatch.
Thin-set over level screed — joint width, spacers and floor drains agreed on plan.
600×1200 mm+ with leveling clips — flatness and lippage tolerance in BOQ.
Falls to drain, waterproof corners and silicone at fixtures before grouting.
Liquid or sheet membrane to curb height — photo log before tile covers it.
Non-slip coping, waterline tile and expansion joints — drain-down window in QT.
R11+ rated tiles for pool decks and villa entrances — slope and drainage noted.
Subway, mosaic or slab behind hob — cut-outs for sockets and range hood.
Accent strips, niches and mosaic panels — layout dry-fit before adhesive.
Tap-test, lift and re-bed affected areas — match grout colour where possible.
Stain-proof epoxy for pools and showers — timing and ventilation plan on site.
Grind high spots, self-level dips and prime before large porcelain passes.
Walk every room with PM — lippage, grout voids and chip touch-ups logged.
Indicative solutions only — substrate moisture, existing adhesive and strata rules must be confirmed on site. Warranty starts after full payment; excludes cracking or delamination from unresolved leaks or movement.
Send room list, tile size and photos of the substrate — we reply on LINE with a visit slot and QT outline.